- Sun Stk Raid Rem Driver Download Torrent
- Sun STK RAID REM Driver Download
- Sun Stk Raid Rem Driver Download 64-bit
- Sun Stk Raid Rem Driver Download Windows 10
Do Not Install the STK 15872 Driver for Solaris 10 5/09. Do not install the driver from the Tools and Drivers CD if you are running Solaris 10 5/09. The Sun StorageTek RAID driver is included in the Solaris 10 5/09 distribution. The STK 15872 driver on the Tools and Drivers CD can be used for previous versions of Solaris. Download Drivers: Download VideoCAM Look Driver Installer. Sun STK RAID REM dell all-in-wonder radeon 9700 pro 128mb sec NVIDIA Vanta PCI 8MB (Compaq). This installation guide describes how to install and remove Oracle's Sun Storage 6 Gigabit per second (Gb) Serial Attached SCSI/SATA (SAS) RAID Expansion Module (REM) RAID host bus adapter (HBA). It also explains how to install any drivers, patches, and firmware required by the HBA, and provides any known issues about the product.
Our database contains 6 drivers for PCIVEN_10DE&DEV_11B7. For uploading the necessary driver, select it from the list and click on ‘Download’ button. Please, assure yourself in the compatibility of the selected driver with your current OS just to guarantee its correct and efficient work.
Drivers List for PCIVEN_10DE&DEV_11B7Pages: 1 |
Pages: 1
| A P P E N D I X C |
| Installing the Solaris OS and the RAID 5 Expansion Module Driver |
If you chose to create a bootable array as part of your installation (see Appendix B), you can install the Solaris operating system (OS) and the REM driver on that bootable array.
This appendix explains how to install the Solaris OS onto a bootable array (logical drive) and then install the REM driver on the array (logical drive).
| Note - This appendix assumes you are experienced with Solaris network installs. |
Topics include:
C.1 Preparing to Install the Solaris OS
Before you begin, prepare to install the Solaris operating system.
To Prepare to Install the Solaris OS |
Complete the procedures in Appendix B.
| Note - For up-to-date Sun StorageTek SAS RAID HBA support, go to http://support.intel.com/support/go/sunraid.htm. |
C.2 Installing the RAID 5 Expansion Module Driver With the Solaris OS
This section contains the following subsection:
To Install the RAID 5 Expansion Module Driver With the Solaris OS |
1. Obtain the Solaris 10 5/08 OS and perform a normal network installation, as described in the Solaris 10 Installation Guide: Network-Based Installations, until you encounter the prompt, Reboot After Installation?.
| Note - Do NOT select Auto Reboot at this point in the network installation process. |
2. Specify that you want to perform a Manual Reboot.
Specifying a manual reboot provides you with the opportunity to install the HBA driver after all other Solaris software is in place. Without this driver, subsequent reboots will fail.
Sun Stk Raid Rem Driver Download Torrent
| Note - If you accidentally choose Auto Reboot, you can still install the HBA driver prior to reboot. From an ok prompt, you can use the boot net -s command to boot from the network into single-user mode and then install the driver. |
3. Use the df command to verify the following:
- The product install directory is mounted on /cdrom from the network install server.
- The logical drive onto which you need to place the driver package is mounted on /a.
/a is the standard Solaris mount point for the disk on which the OS is being installed.
4. If the product install directory and the logical drive are not mounted, manually mount them.
| Note - With this example, you must substitute the correct host names, directory paths, and device paths in your environment. |
5. Apply the HBA driver package, SUNWaac.
6. Apply any patches that are specifically required for the system.
7. Reboot the system.
The system will now be able to see, and boot from, the logical drive on which you installed the Solaris OS.
Sun STK RAID REM Driver Download
| Note - You might want to keep the network install server intact for re-installing or for emergency recovery, because as of Solaris 10 5/08, the SUNWaac driver is not included on standard Solaris install media. Using the boot net -s command from the ok prompt enables you to perform maintenance on the system, while a Solaris CD will not let you do so. You might also want to install the StorMan package on a running system. This enables you to have access to the GUI and command-line interface for the Sun StorageTek SAS RAID Internal HBA card, to configure or monitor disks. |
Sun Stk Raid Rem Driver Download 64-bit
C.3 Next Steps
You can optionally install and use the Sun StorageTek RAID Manager GUI to create arrays on the disk enclosure. See the Sun StorageTek RAID Manager User’s Guide at: http://docs.sun.com/app/docs/prod/stortek.raid.hba
C.3.1 Additional Information
For more information, refer to the following documents at: http://docs.sun.com/app/docs/coll/dsk-cntrl
- Uniform Command-Line Interface User’s Guide, 820-2145
- Sun StorageTek RAID Manager Software User’s Guide, 820-1177
- Sun StorageTek RAID Manager Software Release Notes, 820-2755
- Sun StorageTek SAS RAID HBA Installation Guide Eight-Port, Internal HBA
http://docs.sun.com/app/docs/doc/820-1847-17
For Sun RAID controller drivers, firmware, and utilities including Sun StorageTek RAID Manager for SPARC (8/4/2008) Version 5.50, go to: http://support.intel.com/support/motherboards/server/sunraid/
| Sun Blade T6320 Server Module Service Manual | 820-2386-12 |
Sun Stk Raid Rem Driver Download Windows 10
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.